Matter3D Performance PLA Carbon Fiber (15%) - 1kg
Matter3D Carbon Fiber PETg is made right here in Canada using premium PETg and High-Modulus Carbon Fiber. This filament is ideal for anyone that desires a structural component with high modulus, excellent surface quality, dimensional stability, light weight, and ease of printing.
THE SPOOL WILL NOT FIT IN BAMBULABS AMS OR ULTIMAKER MATERIAL STATION
- Diameter: 1.75 /- 0.02mm, 2.85 /- 0.02mm
- Weight: 1kg
- density 1.20g/cc
- Nozzle Size ≥ 0.4mm; We recommend a hardened steel nozzle
- Nozzle Temp: 225-260°C
- Fan Speed: 0-30%
This material is particularly abrasive among 3D printing filaments. Users may find standard brass nozzles are chewed through very quickly compared to standard wear and tear. When worn through, the nozzle diameter will widen inconsistently and the printer will experience extrusion issues. Because of this, it's strongly recommended this material be printed through a hardened steel nozzle rather than a softer metal.
Unstressed tensile bars molded of PETG exhibit good resistance to dilute aqueous solutions of mineral acids, bases, salts, and soaps, as well as aliphatic hydrocarbons, alcohols, and a variety of oils. Halogenated hydrocarbons, short chain length ketones, and aromatic hydrocarbons still dissolve or swell the plastic.
- 1-kilogram spools
- 15% (by weight) Carbon Fiber content
- Strong and light weight, ideal for structural designs
- High heat resistance (> 100C)
- Matte Finish
- Superior chemical resistance when compared to ABS
- Amorphous structure giving it low, near isotropic shrinkage
- Low moisture absorption, 3x lower than ABS
- Very low odor while printing
- Wide processing range from 230-270°C
